IPB

( Log In ) Log In is for TREC Teachers & Researchers only

 
Reply to this topicStart new topic
> July 26, 2006 - Sediment Filtration Lab
Maggie_Kane
post Jul 26 2006, 04:17 PM
Post #1


Advanced Member
***

Group: TREC Team
Posts: 51
Joined: 12-April 06
Member No.: 27



The "wet lab" is set up in a spare dorm room in Polarbrakka, where the students live. Christina was teaching Eric and Heather how to filter the samples today and I was able to get some pictures of what they were doing.

First, they measure each sample in a graduated cylinder. This gives a fairly accurate reading of the starting volume. This sample is everything sucked up by the tube positioned in the river at either the lower or upper ISCO sampler.

Using the Graduated Cylindar
IPB Image

A small round piece of filter paper is positioned between the top and bottom part of the filter bottles. The sample is poured into the apparatus, and a vacuum pump helps pull the water through the filter paper. There are 4 filters set up, so four of our samples can be worked at once.

Pouring the Sample into the Filter System
IPB Image

It takes 20-30 minutes to get the water through! The vacuum makes a whirring noise and eventually the water goes through drop by drop, leaving just the sediment on the filter. It is kind of like draining spaghetti, where the water passes through the holes in the colander while the pasta stays on top. Each set of 4 samples takes about 40 minutes to process, so with 48 bottles to work every 2 days, this adds up to 8 hours of filtering!

The Filtering System
IPB Image

Then the filter can be taken our and set to dry. Although the paper tends to curl up, it has a bit of a static charge to it and the sediment does not come off. The cabinet helps keep anything bad from happening to the samples!

The Samples Set to Dry
IPB Image

Once the sample is dry, it’s mass will be figured in this very sensitive balance. It can figure mass to 0.001 grams! This will tell us how much sediment is in the water at each 2 hour interval for every day that we sample it. The mass of the filter paper will be subtracted from the total mass, giving us just the data for the sediment. That is like you weighing yourself in heavy ski boots, and then weighing the boots so you could subtract that weight to get just your weight.

Christina Using the Sensative Balance
IPB Image


Question of the day: What do you expect to see in this data? Will there be more sediment on a sunny day, or in the afternoon, during a rain storm or in the middle of the night? Why? (Remember, we still enjoy 24 hours of sunlight here right now, although the sun is dipping down more and by mid August will dip below the horizon at night for the first time since April).

Let me know what you hypothesize by sending an email or posting on the “ask the teacher” forum. We will let you know what we find!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



- NSF Acknowledgment & Disclaimer Time is now: 31st October 2024 - 05:35 PM